EnviroTex Lite

EnviroTex Lite® is a water clear 1:1 mix ration by volume epoxy resin used to coat surfaces. It cures to a long-lasting, high gloss coating in approximately 8 hours at 70°F, and reaches full strength and toughness in about 72 hours. This durable, resilient material requires no polishing to produce a high gloss. One coat is all that is usually required for an attractive finish, however, two or more coats maybe applied one over the other to build additional thickness. Read all instructions prior to use. The original 1:1 epoxy coating system since 1969 Convenient 1:1 mix ratio by volume 20-30 minute working time / 8-12 hour tack-free time Full cure in 72 hours FDA Complaint (FDA 21 CFR 175.300) when accurately measured, thoroughly mixed, and fully cured.  Self-levels to approximately 1/16" Produces a durable high-gloss surface coating for artwork, table

Envirotex Lite Pour On High Gloss Finish 128oz : Tools & Home Improvement

DIY Projects made with EnviroTex Lite

TUTORIAL How to Use Envirotex Lite or ICE Resin on Polymer

Envirotex Lite Acrylic Pour-On High Gloss Finish - 8oz, 32oz, & Gallon Kits

Envirotex Lite Instruction Sheet by Fibreglass Shop - Issuu

How to Use Resin for Beginners - Brooklyn Berry Designs

Envirotex lite is a reactive polymer compound. It cures to a thick, glossy coating in about 8-hour at 70-Degree f, and reaches full strength and

Copy of EnviroTex Lite Pour-On High Gloss Finish 128 oz Kit (Gallon)

Envirotex Lite: 3.78L High Gloss Pour On Alkyd Finish :: Fennell & Gage Home Hardware

Envirotex Lite®, Gallon kit, Pour On High Gloss Finish, (1/2 gallon resin, 1/2 gallon Hardener.) Item # 02128 $74.49 , Gallon Kit: Coverage: 32 square

Envirotex Lite Gallon Kit 02128